Treadmill options
Treadmill for horses
The roller treadmill is, as the name implies, equipped with rollers. The micro rollers have a very positive effect on the blood circulation of the horse's hoof. Because there is less friction between the belt and the rollers than with conventional treadmills, no heat is generated in the belt, so there is no heat transfer to the hooves. In addition, the life of the rubber band is considerably extended due to less resistance.The roller treadmill is equipped with start-up and brake electronics, an electronic emergency stop unit, two ramps with anti-slip mat, drum-drive with mechanical brake, an infrared light gate, 2 locking rods with panic lock and two high stable side walls The sturdy side walls are provided with transparent unbreakable carbonate plate. All steel parts are galvanized and / or powder coated as standard.
The positive effect of treadmill training on the horse's endurance is appreciated in all disciplines of equestrian sports and ensures an improvement in the build-up of the fore and hindquarters muscles.
The treadmill provides controlled training for your horse, ideal for rehabilitation or targeted muscle training. The Treadmill Trainer is designed and built to the highest standards with safety for the horse first.
- Drive system
- Drum motor
- nr of horses
- 1
- Suited for
- Horses up to 800 kg
- Secure
- Infra red fence / Mechanical break
- Speed
- 10 km / h manually with potentiometer
- Other
- Side wall: polycarbonate
- Suplied as standard
- Ramp at the front and rear
- Optional
- Height adjustment
- Basic material
- Steel
- Colour
- Zinc or powdercoating RAL xxxx
- Length
- Walkway 342 cm / total 650 cm
- Height
- 214 cm
- Width
- 135 cm
- Thickness
- 31 cm
- IP rating
- 55
- Quality mark
- CE
- Power cord
- 230/240V L-N-PE
- Power supply
- 230/240V 50/60 Hz
- Power usage
- 4KVA
- Ampere
- 21
- Fuse with
- 25A
- Transport weight
- 1750 kg
- Transport size
- 380 x 140 x 220 cm
Standard options
Treadmill options
Programmeerbare Hydraulische hoogte verstelling
The programmable height adjustment can optionally be built on the treadmill. The hydraulic cylinders are concealed under the side covers and ensure that the treadmill can rise about 6%. By means of different programs to be programmed, the belt can be angled while the horse is walking on the belt.
The speed of the belt can also be programmed.
A total of 6 programs with 10 steps each, which can be varied in time, speed and altitude.
The treadmill will always return to the horizontal position in the event of a power failure or the emergency stop so that the horse cannot drive the belt.
- Other
- 6% programmable
- Speed
- 10 km / h programmable
- IP rating
- 55